Oce 9300 - Inserting New Print Media Roll; Automatic Roll Switching

26 Océ 9300 User Manual
Inserting a new print media roll
Before using the copier for the first time, you must specify the order in which
the paper formats appear on the scanner operating panel. You can do this by
choosing between ISO, ANSI or ARCHITECT paper format on the printer
operating panel.
▼
▼▼
▼
Setting the media format
1
Press ‘Program’ to enter the main menu.
2
Select the ‘
CONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘
CONFIGURATION
’ menu.
4
Select ‘
PLOT MANAGER
’ using the or button.
5
Press ‘next/select’ to enter the ‘
PLOT MANAGER
’ menu.
6
Select ‘
MEDIA FORMAT
’ using the or button.
7
Press ‘next/select’ to enter the ‘
MEDIA FORMAT
’ menu.
8
Select the required format using the or button.
9
Press ‘next/select’ to confirm the selected format.
10
Press ‘Program’ to exit the main menu.
If the message ‘ROLL EMPTY’ appears in the display, you must load a new
roll of print media. Depending on your configuration, you can reload roll 1
and/or roll 2.
Note:
After reloading, the plot is reprinted automatically.
Automatic roll switching
If a roll becomes empty, the printer reports a roll empty error. When this
happens, printing also stops. The printer clears the paper path and generates a
message to indicate that the printer is ready to accept a new print command. If
the correct material type and format is on the other roll, the printer will use that
roll and will resume printing automatically.
If there is no match of material type and format, you must refill the empty roll.