Oce 9300 - Data Format Recognition

Customizing defaults 49
Data format recognition
To optimize your printer’s language recognition capabilities and reduce the
risk of errors, each of the above-mentioned data formats can be individually set
‘ON’ or ‘OFF’. The default is ‘ON’.
▼
▼▼
▼
Optimizing data format recognition
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘
CONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
AUTO MENU
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
AUTO MENU
’menu.
For each graphics language setup, proceed as follows:
8
Select the required ‘
GRAPHICS LANGUAGE
’ item using the or button.
9
Press ‘next/select’ to enter the required language menu.
10
Select ‘
YES
’ or ‘
NO
’ using the or button.
11
Press ‘next/select’ to confirm the selected setting.
12
Press ‘previous’ to re-enter the ‘
GRAPHICS LANGUAGE
’ menu.
After programming all languages:
13
Press ‘Program’ to exit the main menu.