Oce 9300 - Demo Plot Generation; Cancelling a Print Job

44 Océ 9300 User Manual
Demo plot
After installing the Océ 9300, we recommend that you generate a demo plot
in order to make sure that the printer works properly.
▼
Making a demo plot
1
Press ‘Program’ to enter the main menu.
2
Select the ‘
PLOT
’
item using the or button.
3
Press ‘next/select’ to enter the ‘
PLOT
’menu.
4
Select the ‘
DEMO PLOT
’ item using the or button.
5
Press ‘next/select’ to print the demo plot
.
6
Press ‘Program’ to exit the main menu.
Cancel plot
If you want to cancel a plot before printing starts:
▼
Cancelling a plot
1
Press ‘cancel/continue’.
The printer will stop. Printing of the plot may be discontinued.
The print media is always ejected.