Oce 9300 - Printer Memory Configuration; Input Buffer Settings

22 Océ 9300 User Manual
Configuring the printer's memory
The printer’s memory partitions can be configured based on the anticipated
complexity of print jobs.
Input buffer
This option enables you to set the print spool input buffer size. You can select
a small or large buffer. A small buffer leaves more memory available for
processing more complex files. A large buffer frees the host machine sooner.
The default is ‘large’.
Files in the input buffer will be processed and printed in the same order they
arrive.
▼
Setting the input buffer size
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
BUFFERS
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
BUFFERS
’ menu.
6
Select the ‘
INPUT BUFFER
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
INPUT BUFFER
’ menu
8
Select the required input buffer size using the or button.
9
Press ‘next/select’ to confirm the selected size.
10
Press ‘Program’ to leave the main menu.
▼
Activating the new input buffer size
1
Turn the printer off and then on again.
Note:
If you do not restart the printer, the new memory allocation is not
activated. Any print data in the printer’s memory (files in the queue) will
be lost when you turn off the printer.