Oce 9300 - CalComp Graphics Language; CalComp Print Origin

Customizing defaults 61
CalComp
The Océ 9300 supports use of the CalComp graphics language.
CalComp print origin
The term “print origin” refers to the point on the paper at which a drawing
starts: Upper right, upper left, center, lower right and lower left.
The default CalComp origin is lower right. This print origin is used for all
CalComp files, whether the format is set to CalComp or Auto, even if a remote
control command for CalComp is sent.
▼
▼▼
▼
Defining the print origin
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
DATA FORMAT
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
DATA FORMAT
’ menu.
6
Select the ‘
CALCOMP SETUP
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
CALCOMP SETUP
’ menu.
8
Select the ‘
ORIGIN
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
ORIGIN
’ menu.
10
Select the required origin item using the or button.
11
Press ‘next/select’ to confirm the selected origin.
12
Press ‘Program’ to exit the main menu.