Oce 9300 - Serial Baud Rates

Installing the printer 17
8
Select the ‘
PROTOCOL
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
PROTOCOL
’ menu.
10
Select the ‘
XON
_
XOFF
’ item using the or button.
11
Press ‘next/select’ to enter the ‘
XON
_
XOFF
’ menu.
12
Select the appropriate setup using the or button.
13
Press ‘next/select’ to confirm the selected setup.
14
Press ‘Program’ to leave the main menu.
Baud rates
The printer supports the following baud rates: 300, 600, 1200, 2400, 4800,
9600, 19200 and 38400. Default is 9600.
▼
Defining the baud rate
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
CONNECTIONS
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
CONNECTIONS
’ menu.
6
Select the ‘
SERIAL
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
SERIAL
’ menu.
8
Select the ‘
TRANSMISSION
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
TRANSMISSION
’ menu.
10
Select the ‘
BAUD RATE
’ item using the or button.
11
Press ‘next/select’ to enter the ‘
BAUD RATE
’ menu.
12
Setup the required baud rate using the or button.
13
Press ‘next/select’ to confirm the selected baud rate.
Note:
Choose the fastest baud rate compatible with your system.
14
Press ‘Program’ to leave the main menu.