Oce 9300 - Page 36

36 Océ 9300 User Manual
▼
▼▼
▼
Programming automatic roll selection
1
Press ‘Program’ to enter the main menu.
2
Select the ‘
MEDIA SETTINGS
’ item using the or button.
3
Press ‘next/select’ to enter the ‘
MEDIA SETTINGS
’menu.
4
Select ‘
MEDIA MODE
’ using the or button.
5
Press ‘next/select’ to enter the ‘
MEDIA MODE
’ menu.
6
Select ‘
AUTO ROLL
’ using the or button.
7
Press ‘next/select’ to enter the ‘
AUTO ROLL
’ menu.
8
Select on or off using the or button.
9
Press ‘next/select’ to confirm the selected mode.
10
Press ‘Program’ to exit the main menu.
▼
▼▼
▼
Programming automatic switching
1
Press ‘Program’ to enter the main menu.
2
Select the ‘
MEDIA SETTINGS
’ item using the or button.
3
Press ‘next/select’ to enter the ‘
MEDIA SETTINGS
’menu.
4
Select ‘
MEDIA MODE
’ using the or button.
5
Press ‘next/select’ to enter the ‘
MEDIA MODE
’ menu.
6
Select ‘
AUTO SWITCH
’ using the or button
7
Press ‘next/select’ to enter the ‘
AUTO SWITCH
’ menu.
8
Select on or off using the or button.
9
Press ‘next/select’ to confirm the selected mode.
10
Press ‘Program’ to exit the main menu.
▼
▼▼
▼
Setting the time-out for manual feed
The default is 60 seconds.
1
Press ‘Program’ to enter the main menu.
2
Select the ‘
MEDIA SETTINGS
’ item using the or button.
3
Press ‘next/select’ to enter the ‘
MEDIA SETTINGS
’menu.
4
Select ‘
MANUAL FEED
’ using the or button.
5
Press ‘next/select’ to enter the ‘
MANUAL FEED
’ menu.
6
Select the ‘
TIMEOUT
’ using the or button.
7
Press ‘next/select’ to enter the ‘
TIMEOUT
’ menu.
8
Select the desired time-out using the or button.
9
Press ‘next/select’ to confirm the selected time-out.
10
Press ‘Program’ to exit the main menu.