Oce 9300 - Page 86

86 Océ 9300 User Manual
▼
Defining autoscaling
1
Press ‘Program’ to enter the main menu.
2
Select the ‘C
ONFIGURATION
’ item using the or button.
3
Press ‘next/select’ to enter the ‘C
ONFIGURATION
’ menu.
4
Select the ‘
PLOT MANAGER
’ item using the or button.
5
Press ‘next/select’ to enter the ‘
PLOT MANAGER
’ menu.
6
Select the ‘
TRANSFORM
’ item using the or button.
7
Press ‘next/select’ to enter the ‘
TRANSFORM
’ menu.
8
Select the ‘
SCALING
’ item using the or button.
9
Press ‘next/select’ to enter the ‘
SCALING
’ menu.
10
Select ‘
AUTOSCALE
’ on using the or button.
11
Press ‘next/select’ to enter the ‘
AUTOSCALE
’ menu.
12
Select ‘
OFF
,
BEST FIT
,
A
4,
A
3,
A
2,
A
1’ or
‘
A
0’ using the or button.
13
Press ‘next/select’ to confirm the required setting
14
Press ‘Program’ to exit the main menu.