Menu Tables
FQ-CR2 User’s Manual
163
Appendices
10
Save to file
Setting
Scene data Saves scene data with an SCN file name
extension.
--- --- p. 83
Scene group data Saves all scene data with an SGP file
name extension.
Sensor system data Saves system data with an SYD file
name extension.
All Sensor data Saves all Sensor data with a BKD file
name extension.
Touch Finder data Saves Touch Finder data with an MSD
file name extension.
Logging
Statistical data Saves statistical data with a CSV file
name extension.
--- --- p. 76
Logging image Saves image data with an IFZ file name
extension.
Logging data Saves measurement data with a CSV file
name extension.
Load from file
Scene data Loads scene data. --- --- p. 83
Scene group data Loads scene group data.
Sensor system data Loads system data.
All Sensor data Loads all Sensor data.
Touch Finder data Loads Touch Finder data.
Sensor settings
Information Used to check the Sensor information. --- --- p. 90
Model Used to check the model and software
version of the connected Sensor.
--- System
Version
Name Displays the name of the connected
Sensor.
MAC address Used to check the MAC address of the
connected Sensor.
--- ---
Rename Used to change the name of a con-
nected Sensor.
15 alphanumeric characters max. --- p. 90
Memory
state
Used to check the status of Sensor
memory.
--- --- p. 90
Error history View
history
Displays a history of errors that have
occurred in the Sensor.
--- System p. 154
Delete
history
Deletes the error history. --- p. 155
Menu command Description Setting range Data Refer-
ence
FQ Sensor User Manual.book 163 ページ ２０１１年７月８日 金曜日 午後２時３０分
To Next Page
Loading...
