Menu Tables
162
FQ-CR2 User’s Manual
Test Tab Page
Run Tab Page (from Setup Display)
Tool
Setup Mode
Menu command Description Setting range Data Refer-
ence
Continuous test Used to check the individual judgement
results for the inspection items and to
adjust the judgement parameters.
--- --- p. 54
Graphic Displays the input image.
Graphics + Details Displays the inspection item individual
judgement results and measurement val-
ues.
All results/Region Displays the inspection item individual
judgement results for all inspection
items.
p. 57
Trend Monitor Displays the individual judgement results
saved in the Sensor in a trend monitor.
p. 54
Histogram Displays the individual judgement results
saved in the Sensor in a histogram.
Auto display
(trend monitor and
histogram only)
Same as the trend monitor and histogram for [Run] Mode. --- p. 64
p. 65
Display range
(trend monitor and
histogram only)
Number of data
(trend monitor only)
p. 64
Number of data
(histogram only)
p. 65
Save data Saves scene data and system data. --- --- p. 58
Menu command Description Setting range Data Refer-
ence
Switch to Run mode Switches to Run Mode. --- --- p. 60
Menu command Description Setting range Data Refer-
ence
Select scene --- --- p. 70
Select Switches to a registered scene. ---
Rename Used to delete, copy, or change the
name of a scene.
15 alphanumeric characters
Copy ---
Clear
FQ Sensor User Manual.book 162 ページ ２０１１年７月８日 金曜日 午後２時３０分
To Next Page
Loading...
