Menu Tables
164
FQ-CR2 User’s Manual
Sensor settings
Startup set-
tings
Startup
mode
Sets whether the startup scene number
is set manually.
ON or OFF (Scene number when set-
tings were saved is startup scene num-
ber.)
System p. 71
Startup
scene
Set the scene number to use at startup. Standard models: 0 to 31, Single-func-
tion models: 0 to 7, Default: 0
System
Password
settings
Password
ON/OFF
Enables (ON) or disables (OFF) the
password.
OFF (default) or ON System p. 86
Enter
password
Sets a password. 15 characters max. System
Timeout Sets the timeout time for inspection
(msec).
100 to 9999 System
Retry details Sets the inspection retry type. Normal retry, Exposure retry, Scene
retry, Trigger retry, None (default)
System
Network settings
Ethernet p. 31
Auto Selects whether to use the automatic IP
address setting method.
ON (default) or OFF System
IP address Enter the IP address of the Sensor.
(Enabled when automatic setting is
OFF.)
a.b.c.d
a:1 to 223
b: 0 to 255
c: 0 to 255
d: 2 to 254
(Default: 10.5.5.100)
System p. 31
Subnet mask Inputs the subnet mask.
(Enabled when automatic setting is
OFF.)
0.0.0.0 to 255.255.255.255
(Default: 255.255.255.0)
System p. 31
Initialize Initializes the Sensor settings and saved
data.
--- --- p. 89
Restart Restarts the Sensor --- ---
Update Updates the Sensor system to the most
recent data.
--- --- p. 180
TF settings
Information Used to check the Touch Finder informa-
tion.
--- System p. 90
Model Used to check the Touch Finder model. --- --- ---
Version Used to check the software version of
the Touch Finder.
--- --- p. 90
MAC address Used to check the MAC address of the
Touch Finder.
--- ---
Memory state Used to check the Touch Finder memory
state.
--- --- p. 90
Error history View
history
Displays a history of errors that have
occurred in the Touch Finder.
--- System p. 154
Delete
history
Deletes the error history. ---
Battery level Used to check the battery level. --- --- p. 90
File format Used to set the output format for output
log data to a file.
--- --- p. 77
Field separator None, Comma (default), Tab, Space,
Colon, Semicolon, CR, or CR+LF
---
Decimal symbol None, Point (default), or Comma ---
Record separator None, Comma, Tab, Space, Colon,
Semicolon, CR, or CR+LF (default)
---
Menu command Description Setting range Data Refer-
ence
FQ Sensor User Manual.book 164 ページ ２０１１年７月８日 金曜日 午後２時３０分
To Next Page
Loading...
