Menu Tables
FQ-CR2 User’s Manual
165
Appendices
10
TF settings
SD card SD card
informa-
tion
Displays the capacity and remaining
memory in the SD card.
--- --- p. 85
Format Formats an SD card. --- --- p. 85
Startup
display
Display
pattern
Sets the display to use in Run Mode. Graphic, Graphics + Details, All results/
Region, Statistical data, Trend monitor,
Histogram
System p. 62
Display
update
mode
Sets the image to update in Run Mode. Latest image, Last NG image p. 73
LCD back-
light
Bright-
ness
Sets the brightness. 0 to 5 System p. 74
ECO
mode
Enables (ON) or disables (OFF) ECO
Mode.
ON, OFF System p. 74
Ethernet --- System p. 31
IP address Inputs the IP address of the Touch
Finder.
a.b.c.d
a:1 to 223
b: 0 to 255
c: 0 to 255
d: 0 to 255
(Default: 10.5.5.100)
p. 31
Subnet mask
Inputs the subnet mask.
0.0.0.0 to 255.255.255.255
(Default: 255.255.255.0)
p. 31
Search unreachable
sensors
Displays the IP address if the same IP
address is used for more than one Sen-
sor or if there is Sensor that is not in the
subnet. You can change this IP address
and subnet mask. This setting is valid
only when automatic setting of the Sen-
sor’s IP address is OFF.
--- --- ---
Language Changes the language to display on the
Touch Finder.
English, German, French, Italian, Span-
ish, Traditional Chinese, Simplified Chi-
nese, Korean, or Japanese (The default
language is selected at startup.)
System p. 89
Time settings Used to set the current date and time. Default: Selected at startup. System p. 89
Touch screen calib Used when there is an offset between
the touch screen positions and pointers.
--- --- p. 90
Initialize Initializes the Touch Finder settings. --- --- p. 89
Restart Restarts the Touch Finder. --- --- p. 89
Update Updates the Touch Finder system to the
most recent data.
--- --- p. 180
Menu command Description Setting range Data Refer-
ence
FQ Sensor User Manual.book 165 ページ ２０１１年７月８日 金曜日 午後２時３０分
To Next Page
Loading...
