Omron JX User Manual

5-4
5-1 Special Display List (Error Codes)
5
Maintenance Operations
Other Displays
Name Description
Display on Digital
Operator
Reset Appears with the [RS] terminal turned ON or during initialization.
Undervoltage
standby
Appears when the Inverter is in the undervoltage standby condition or
with the power shut off.
Restart during
momentary power
interruption
Restart during trip
The restart function is in operation.
Setting initialization Appears while the set values are being initialized.
Trip monitor
initialization
Appears while the trip monitor is being initialized.
No data
Appears if no data exists.
(Trip monitor)
Communications
error
Appears if an error occurs between the Digital Operator and the
Inverter.
0 0

Omron JX Specifications

General

Enclosure Rating	IP20
Output Frequency	0 to 400 Hz
Protection	Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit
Communication	RS-485
Frequency Range	0.1 to 400 Hz
Power Rating	0.4 to 15 kW
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +65°C
Humidity	5 to 95% RH (non-condensing)
Altitude	Up to 1000 m above sea level
Output Voltage	3-phase 200 to 240 VAC, 3-phase 380 to 480 VAC
Cooling Method	Fan cooling