Omron JX - Fin Temperature Monitor [D018]; Output Voltage Monitor [D013]; Power on Time Monitor [D017]; Total RUN Time [D016]

4-4
4-1 Monitor Mode
4
Functions
Output Voltage Monitor [d013]
Displays the output voltage value (Vac) of the Inverter.
The monitor LED indicator "V" lights up.
(Display)
0. to 600.: Displays in increments of 1 V.
Total RUN Time [d016]
Displays the Inverter RUN time.
(Display)
0. to 9999. : Displays in increments of 1 hour.
1000 to 9999 : Displays in increments of 10 hours.
⎡100 to ⎡999 : Displays in increments of 1000 hours.
Power ON Time Monitor [d017]
Displays the total power supply time of the Inverter.
(Display)
0. to 9999. : Displays in increments of 1 hour.
1000 to 9999 : Displays in increments of 10 hours.
⎡100 to ⎡999 : Displays in increments of 1000 hours.
Fin Temperature Monitor [d018]
Displays the fin temperature.
(Display)
0. to 200. : Displays in increments of 1 °C.
Fault Frequency Monitor [d080]
Displays the number of times the Inverter has tripped.
(Display)
0. to 9999. : Displays in increments of 1 time.
1000 to 6553 : Displays in increments of 10 times.