Omron JX - Operation Procedure (Example: Factory Default); (Example: Factory Default)3-10

3-10
3-4 Operation Procedure (Example: Factory Default)
3
Operation
3-4 Operation Procedure
(Example: Factory Default)
Displaying the Monitor Mode, Basic Function Mode, and Extended
Function Mode
1. The data of the set monitor is displayed. (Default is "0.0")
2. The code of the monitor mode is displayed (as "d001").
•Press the Mode key once to return from the code
display of the monitor mode to the monitor
display.
("d002" is displayed.)
(Continued to the next page)
Power On
0 . 0
Press
d001
Press Press
d002
(13 times)(13 times)
Press Press