Omron JX

4-53
4-2 Function Mode
4
Functions
UP/DOWN Function
This function changes the Inverter output frequency using UP and DWN terminals of the multi-
function inputs.
•While the UP/DWN terminal is turned on, the acceleration/deceleration time depends on F002,
F003/F202, and F203.
•You can store a frequency set value after UP/DWN adjustment. Choose whether to store the value
with C101.
Also, you can clear the stored frequency set value by allocating 29 (UDC) to the desired multi-
function input and turning on/off the UDC terminal.
[UP/DOWN Function Enabled/Disabled]
•The UP/DOWN function is disabled when the JG operation is enabled.
•The UP/DOWN function is enabled when the frequency reference selection (A001) is set to the
Digital Operator (02).
•The UP/DOWN function is enabled when the multi-step speed reference is enabled.
Data Symbol Function name Status Description
27 UP
UP/DWN function
accelerated
ON
Increases the current speed during the signal
input period.
OFF Keeps the current speed.
28 DWN
UP/DWN function
decelerated
ON
Decreases the current speed during the signal
input period.
OFF Keeps the current speed.
29 UDC
UP/DWN function data
clear
ON Clears the stored UP/DWN speed.
OFF Keeps the stored UP/DWN speed.
Related parameters
C001 to C005
Required settings A001 = 02, C101
Frequency reference selection (A001) Multi-step speed Jogging Enabled/Disabled
⎯⎯ON Disabled
⎯ ON OFF Enabled
00
OFF OFF Disabled
01
02 OFF OFF Enabled
03 OFF OFF Disabled
Parameter No. Function name Data Description
C101
UP/DWN
selection
00
Does not store the frequency reference adjusted using UP/DWN.
After restoring the power, returns the set value to that before UP/DWN.
01
Stores the frequency reference adjusted using UP/DWN.
After restoring the power, maintains the set value after UP/DWN
adjustment.