Omron JX - Page 64

3-14
3-4 Operation Procedure (Example: Factory Default)
3
Operation
2. Change the function code.
•You can change the 4th digit when "d" blinks.
("A001" is displayed.)
•"A" blinks.
•Press the Enter key to fix the blinking digit.
3. Change the 3rd digit of the function code.
•"0" of the 3rd digit blinks.
•Press the Enter key to fix "0" of the 3rd digit as
you need not change it.
•Press the Mode key to start "A" blinking again.
4. Change the 2nd digit of the function code.
•"0" of the 2nd digit blinks.
•Press the Mode key to start "0" of the 3rd digit
blinking again.
(Continued to the next page)
d001
Press
(2 times)
a001
Press
("A" is entered.)
a001
Press
("0" is entered.)
a001
Press
(2 times)