Sensor connection screen
This allows you to access the sensor information, the connection with the sensor, the main screen of
each line, etc.
Group Item Description
Sensor informa-
tion
Sensor name Allows you to change the sensor name.
Comment Allows you to enter a comment for the sensor.
Type Displays the sensor type information.
Version Displays the sensor version information.
Available application memory Displays the amount of available application memory.
Online IP address Sets the IP address of the sensor for online connec-
tions.
Connect Establishes an online connection to the sensor with
the specified IP address.
Disconnect Disconnects the sensor currently connected with an
online connection.
Search for sensors Searches for sensors within the same network.
Sensor Restart Restarts the sensor.
Initialize Initializes the sensor.
Additional Information
• For details on the settings in the sensor connection screen, refer to 3-3
Establishing an On-
line Connection with a Vision Sensor on page 3 - 4.
• If there is already a different FH/FHV slave device in the project with an established online
connection, you will not be able to establish an online connection for a new FH/FHV slave
device. First, switch the other FH/FHV slave device from online to offline.
2 Basic Operations
2 - 15
FH/FHV Series Vision System Operation Manual for Sysmac Studio (Z343-E1)
2-4 Description of Screen Components
2
2-4-5 Edit Pane
To Next Page
Loading...
Need help?
General
