EasyManua.ls Logo

Oracle SL150 - Import Tape Cartridges; Export Tape Cartridges; Open the Mailslot

Oracle SL150
196 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Import Tape Cartridges
Use the mailslot to import tapes into the library.
1. If importing into a partitioned library, assign the mailslot to a partition (see Assign
the Mailslot to a Partition).
2. Open the Mailslot. Place the tapes in the mailslot. Close the Mailslot .
3. Use the host application to move the tapes from the mailslot to the storage slots.
If you cannot use the host application, you may move the tapes with the remote
interface. Then, update the host application database to account for the new
tapes.
4. In a partitioned library, once you are finished importing tapes, unassign the
mailslot (see Unassign the Mailslot).
Related Topics
Move Tape Cartridges with the Remote Interface
The remote interface can move cartridges when you cannot use the host
application.
Export Tape Cartridges
Use the mailslot to remove tapes from the library.
1. If exporting from a partitioned library, assign the mailslot to a partition (see Assign
the Mailslot to a Partition).
2. Use the host application to move the tapes from the storage slots to the mailslot.
If you cannot use the host application, you can move tapes using the remote
interface. Then, after closing the mailslot update the host application database to
account for the removed tapes.
3. Open the Mailslot. Remove the tapes. Close the Mailslot .
4. In a partitioned library, once you are finished exporting tapes, unassign the
mailslot (see Unassign the Mailslot)..
Related Topics
Move Tape Cartridges with the Remote Interface
The remote interface can move cartridges when you cannot use the host
application.
Open the Mailslot
Open the mailslot to add or remove tapes from the library.
1. If using a partitioned library, make sure the mailslot is assigned to a partition (see
Assign the Mailslot to a Partition).
2. Open the mailslot with the user interface:
If using the remote interface: Select Library in the left menu. From the
Mailslot drop-down
, select Open and then click OK.
Chapter 6
Import or Export Cartridges Using the Mailslot
6-13

Table of Contents

Related product manuals