4
Configure the Library
Update the library configuration using the wizard, update library firmware, and manage
the library's certificate.
• Run the Configuration Wizard
– Configure the Network Interfaces
– Set the Library Date and Time
– Configure Library Settings
– Partition the Library
– Configure Library Managed Encryption (LME)
• Update Firmware
• Manage the Library's SSL/TLS Certificate for HTTPS
• Configure Accessibility Settings
• Set Automatic Screen Refresh
Related Topics
• Configure the Library After Powering-on for the First Time
The library will launch the Initialization Wizard after the first power on. Use the
front touch screen to configure the library with the wizard.
Run the Configuration Wizard
The configuration wizard sets the library time, network parameters, library settings,
partitioning, and encryption.
1. From the remote interface, select Configuration in the left menu.
2. Click Configure
.
3. Within the Configuration Wizard, select each configuration task that you need to
perform, and then click Next. Proceed to the relevant sections:
• Configure the Network Interfaces
• Set the Library Date and Time
• Configure Library Settings
• Partition the Library
• Configure Library Managed Encryption (LME)
• Review and Apply Configuration Wizard Changes
4-1
To Next Page
Loading...
