Oracle SL150 - Base Module; Base Module and Expansion Modules (Rear View)

Illustration Legend:
1 - Base module (Module 1)
2 - Expansion module (Module 2)
3 - Left cartridge magazines
4 - Right cartridge magazines
5 - Front control panel
6 - Mailslot
Figure 1-2 Base Module and Expansion Modules (Rear View)
Illustration Legend:
1 - Base module (Module 1 label is on the rear panel of the module)
2 - Expansion modules (a label with the module number is on the rear panel)
3 - Robot lock (knob-type)
4 - Tape drive tray
5 - Power supply
6 - Module controller
Base Module
The Base Module contains the main hardware components of the library. One Base
Module is required per library.
The Base Module is a 3U rack mounted unit. Each library must contain a Base Module
at the top of the library. A single Base Module is the smallest library configuration.
The Base Module ships with:
• Front control panel
• Two 15-slot tape magazines (left and right)
• Standard Mailslot with four tape slots (firmware version 2.25, and later, supports a
19 slot Expanded Mailslot configuration)
• Robot
• Power supply (with an option to add a second power supply)
Chapter 1
Base Module
1-2