Oracle SPARC T5-4 User Manual

Remove the Front I/O Assembly
132 SPARC T5-4 Server Service Manual • July 2016
1.
Remove the main module from the server.
See “Remove the Main Module” on page 99.
2.
Take the necessary ESD precautions.
See “Prevent ESD Damage” on page 54.
3.
Locate the front I/O assembly on the main module.
See “Main Module Components” on page 19.
4.
Disconnect the ribbon cable that connects the assembly to the motherboard and
remove the front I/O assembly.
a.
Pull the cable free of the connector on the motherboard (panel 1).
b.
Push the cable connector aside to access the captive screw that secures the
assembly to the motherboard (panel 2).
Loosen the screw to release the lower end of the assembly.

Oracle SPARC T5-4 Specifications

General

Brand	Oracle
Model	SPARC T5-4
Category	Server
Language	English