Verify the System Configuration PROM
Servicing the System Configuration PROM 123
1.
Orient the system configuration PROM properly onto the main module.
2.
Press down on the system configuration PROM until it is completely seated on
the main module.
3.
Insert the main module back into the server.
See “Install the Main Module” on page 102.
4.
Return the server to operation. See “Returning the Server to
Operation” on page 191.
Related Information
■
“Remove the System Configuration PROM” on page 121
■
“Verify the System Configuration PROM” on page 123
Verify the System Configuration PROM
1.
Verify that the banner display includes an Ethernet address and a Host ID value.
The Ethernet address and Host ID values are read from the system configuration PROM. Their
presence in the banner verifies that the SP and the host can read the system configuration
PROM.
.
.
To Next Page
Loading...
Need help?
General