Tools Needed for Service
Preparing for Service 47
■
“Antistatic Mat” on page 47
Antistatic Wrist Strap
Wear an antistatic wrist strap and use an antistatic mat when handling components such as hard
drive assemblies, circuit boards, or PCIe cards. When servicing or removing server components,
attach an antistatic strap to your wrist and then to a metal area on the chassis. Following this
practice equalizes the electrical potentials between you and the server.
Related Information
■
“Safety Symbols ” on page 46
■
“ESD Precautions” on page 46
■
“Antistatic Mat” on page 47
Antistatic Mat
Place ESD-sensitive components such as motherboards, memory, and other PCBs on an
antistatic mat.
Related Information
■
“Safety Symbols ” on page 46
■
“ESD Precautions” on page 46
■
“Antistatic Wrist Strap” on page 47
Tools Needed for Service
You will need the following tools for most service operations:
■
Antistatic wrist strap
■
Antistatic mat
■
No. 1 Phillips screwdriver
■
No. 2 Phillips screwdriver
■
No. 1 flat-blade screwdriver (battery removal)
To Next Page
Loading...
Need help?
General