Oracle SPARC T5-4 User Manual

Prevent ESD Damage
54 SPARC T5-4 Server Service Manual • July 2016
See:
■
“Power Off the Server (Oracle ILOM)” on page 52
■
“Power Off the Server (Power Button – Graceful Shutdown)” on page 52
■
“Power Off the Server (Power Button – Emergency Shutdown)” on page 53
2.
Disconnect all power cords from the server.
Caution - Because standby power is always present in the system, you must unplug the power
cords before accessing certain components.
Related Information
■
“Safety Information” on page 45
■
“Servicing the Main Module” on page 97
■
“Servicing the Storage Backplanes” on page 107
■
“Servicing the Service Processor Card” on page 115
■
“Servicing the System Configuration PROM” on page 121
■
“Servicing the System Battery” on page 125
■
“Servicing the Front I/O Assembly” on page 131
■
“Servicing the Rear I/O Module” on page 173
■
“Servicing the Rear Chassis Subassembly” on page 183
Prevent ESD Damage
Many components contained in the processor modules and main module can be damaged by
ESD. To protect these components from damage, perform the following steps before opening
these modules for service.
1.
Prepare an antistatic surface to set parts on during the removal, installation, or
replacement process.
Place ESD-sensitive components, such as the printed circuit boards, on an antistatic mat. The
following items can be used as an antistatic mat:
■
Antistatic bag used to wrap a replacement part
■
ESD mat
■
A disposable ESD mat (shipped with some repacement parts or optional server components)
2.
Attach an antistatic wrist strap.
When servicing or removing server components, attach an antistatic strap to your wrist and then
to a metal area on the chassis.

Oracle SPARC T5-4 Specifications

General

Brand	Oracle
Model	SPARC T5-4
Category	Server
Language	English