Install the Front I/O Assembly
Servicing the Front I/O Assembly 133
c.
Gently pull the front I/O assembly toward the back of the main module until
the ports at the front of the assembly clear the front of the main module, and
then remove the front I/O assembly from the main module (panel 3).
Related Information
■
“Front I/O Assembly Reference” on page 131
■
“Install the Front I/O Assembly” on page 133
Install the Front I/O Assembly
Caution - This procedure requires that you handle components that are sensitive to static
discharge. Static discharges can cause the components to fail.
1.
Take the necessary ESD precautions.
To Next Page
Loading...
Need help?
General