Oracle SPARC T5-4 - Servicing the System Battery; Remove the System Battery

Servicing the System Battery 125
Servicing the System Battery
The system battery is a cold-service component that can be replaced by a customer. For the
location of the system battery, see “Processor Module Components” on page 18.
Caution - This procedure requires that you handle components that are sensitive to electrostatic
discharge. This discharge can cause failure of server components.
■
“Remove the System Battery” on page 125
■
“Install the System Battery” on page 126
■
“Verify the System Battery” on page 128
Remove the System Battery
The system battery is a cold-service component that can be replaced by a customer.
Caution - This procedure requires that you handle components that are sensitive to electrostatic
discharge. This discharge can cause failure of server components.
1.
Take the necessary ESD precautions.
See “Prevent ESD Damage” on page 54.
2.
Remove the main module from the server.
See “Remove the Main Module” on page 99.
3.
Locate the system battery in the main module.
See “Main Module Components” on page 19.