DIMM Configuration Errors
Servicing DIMMs 85
In addition to these general memory configuration errors, one or more rule-specific messages is
displayed, indicating the type of configuration error detected. To identify the DIMMs affected,
use the fmadm faulty command as described in “Check for Faults” on page 38.
Related Information
■
“Check for Faults” on page 38
■
“Clear a Fault” on page 40
■
“DIMM Population Rules” on page 69
■
“DIMM Addresses” on page 70
■
“DIMM Rank Classification” on page 72
■
“DIMM Fault Handling” on page 73
To Next Page
Loading...
Need help?
General