Handbook
November 2011 / 59-UMC0071 / Issue 01
Mercury iTC
Page 16
HEALTH AND SAFETY
Original Instructions
1.1.3 Maintenance and adjustment
Only qualified and authorised persons must service or repair this equipment.
Under no circumstances must the user adjust or repair this equipment while the
electrical power supply is connected.
Ensure that the equipment is disconnected from the AC electrical power supply before
the covers are removed or fuses are removed or fitted. It is NOT sufficient to switch off
the <1 0> switch on the rear panel or the <On/Off> button on the front panel.
The equipment contains capacitors that may remain charged after AC electrical power is
removed. Discharge all capacitors before starting work.
1.1.4 Restrictions on use
The equipment is not suitable for use in explosive, flammable or hazardous
environments.
The equipment does not provide protection against the ingress of water. The equipment
must be positioned so that it will not be exposed to water ingress.
1.2 Cautions
1.2.1 Electrostatic caution
This equipment contains electrostatic sensitive devices (ESSD). Use ESSD protective
procedures in accordance with BS CECC00015 Part 1 and American National Standard
EIA-541-1998 when installing or maintaining this product.
Caution
ELECTROSTATIC SENSITIVE EQUIPMENT
This equipment contains electrostatic sensitive devices (ESSD). Use
approved ESSD procedures when installing or maintaining this product.
ÉQUIPEMENT SENSIBLE AUX DÉCHARGES ÉLECTROSTATIQUE
Cet équipement contient des dispositifs qui sont sensibles aux
décharges électrostatiques (ESSD). Utiliser des procédures ESSD
homologuées lors de l'installation ou de la maintenance de ce produit.
To Next Page
Loading...
Need help?
General