Oxford Instruments Mercury iTC User Manual

Handbook
November 2011 / 59-UMC0071 / Issue 01
Mercury iTC
Page 29
USER INTERFACE
Original Instructions
3.2.3.1 Channel summary panel
Figure 3-11 shows a typical channel-summary panel on the Home page.
Figure 3-11 Channel-summary panel
The channel-summary panel displays the following information:
 Channel identifier or nickname.
 The main display value for the channel (e.g. measured temperature).
 Identifier of the channel heater (if applicable).
 Output power of the channel heater (if applicable).
 Identifier of the gas-flow controller (if applicable).
 Percentage flow for the gas-flow controller (if applicable).
If the summary panel has not been configured:
the panel displays the name None and the value 0.0000.
1 Tap the panel once to display the Channel Display Configuration Page (see
Figure 3-12).
If the summary panel has been configured:
the panel displays a sensor name and a sensor value.
1 Tap the panel once to display the Sensor Details page (see Section 3.2.6).
2 Tap the panel twice to display the Channel Display Configuration Page (see
Figure 3-12).

Oxford Instruments Mercury iTC Specifications

General

Brand	Oxford Instruments
Model	Mercury iTC
Category	Controller
Language	English