Oxford Instruments Mercury iTC - Isobus Settings Tab; GPIB Settings Tab

Handbook
November 2011 / 59-UMC0071 / Issue 01
Mercury iTC
Page 48
USER INTERFACE
Original Instructions
3.2.12.5 ISOBus Settings tab
The page contains the following fields and controls:
 ISOBus Address
Select an ISOBUS address for this instrument from the drop-down menu.
The page contains the following buttons:
 Alarm
Tap once to access the Alarm Logs page (see Section 3.2.13).
3.2.12.6 GPIB Settings tab
The page contains the following fields and controls:
 GPIB Address
Select a GPIB address for this instrument from the drop-down menu.
The page contains the following buttons:
 Alarm
Tap once to access the Alarm Logs page (see Section 3.2.13).