Handbook
November 2011 / 59-UMC0071 / Issue 01
Mercury iTC
Page 9
PREFACE
Original Instructions
PREFACE
Welcome to the Operator’s Handbook for the Oxford Instruments NanoScience Mercury iTC cryogenic
environment controller unit. The Mercury iTC is a high performance laboratory temperature controller,
with a number of features specifically intended for use in cryogenic applications.
This Operator’s Handbook provides all the information necessary for the safe and proper installation
and operation of the Mercury iTC.
Use of this manual
This manual provides operating and service information for the Oxford Instruments NanoScience
Mercury iTC cryogenic environment controller.
Chapter 1 to Chapter 5 provide essential information that must be read and understood before
operating the Mercury iTC for the first time.
Customer support
Oxford Instruments NanoScience has global customer support facilities that provide a coordinated
response to customer’s queries. All queries are recorded on our support database and are dealt with
as quickly as possible. If we are not able to answer the query immediately, we will contact you
promptly.
Before contacting a customer support facility, please ensure that you have referred to the appropriate
section of this manual.
Please direct all queries through your nearest support facility (see below) and have the following
details available:
You can contact us at the telephone numbers and email addresses listed on the last page of this
handbook.
System type
Mercury iTC
Serial number
Contact information Your name, the name of your company, and how we can contact you.
Details of your query The nature of your problem, part numbers of spares required, etc.
To Next Page
Loading...
Need help?
General