Oxford Instruments Mercury iTC - Cal Update Settings Tab

Handbook
November 2011 / 59-UMC0071 / Issue 01
Mercury iTC
Page 50
USER INTERFACE
Original Instructions
3.2.12.8 Cal Update settings tab
This page allows the user to load calibration files into the controller from a USB memory
stick. The page contains the following fields:
 Select Calibration Type
Select the type of calibration file to be loaded.
 Select Calibration File
Select the file to be loaded from the memory stick. Once selected, the file is loaded
automatically.
The page contains the following buttons:
 Alarm
Tap once to access the Alarm Logs page (see Section 3.2.13).