Handbook
November 2011 / 59-UMC0071 / Issue 01
Mercury iTC
Page 17
HEALTH AND SAFETY
Original Instructions
1.2.2 Cooling caution
Internal components in this equipment are air-cooled. Ensure that the side and rear
ventilation spaces are not obstructed.
If the iTC is mounted in a rack, ensure that the rear of the rack is open. Site the rack at
least 30 cm from a wall or other obstruction, to ensure adequate airflow around the unit.
1.3 Solid waste
The lithium battery on the motherboard will become solid waste if it has to be replaced.
Dispose of this item according to local and national regulations.
Caution
EQUIPMENT VENTILATION
If the Mercury unit is to be rack mounted, to ensure an adequate airflow
around the unit it is important that the back of the rack is open and the
rack is not placed less than 30 cm from a back wall.
Lorsque le Mercury est monté en rack, s'assurer que le rack est ouvert à
l'arrière et se trouve au minimum à 30 cm du mur afin de garantir une
circulation d'air suffisante.
To Next Page
Loading...
Need help?
General