Oxford Instruments Mercury iTC User Manual

Handbook
November 2011 / 59-UMC0071 / Issue 01
Mercury iTC
Page 44
USER INTERFACE
Original Instructions
3.2.12.1 Display Settings tab
The page contains the following fields and controls:
 Auto Dim Option
When User is displayed, the auto-dim feature is turned off. When Sensor is
displayed, the auto-dim feature is active (see Section 4.1.1).
 Timeout value (sec)
Set the time that must elapse (in seconds) before the display brightness changes.
This field is only displayed if Auto Dim Option is set to Sensor.
 Auto Dim (%)
Enter a percentage brightness value for the display when it is automatically dimmed.
Auto Dim (%) must be less than, or equal to, Brightness (%).
 Brightness (%)
Select a percentage value from the drop-down menu to alter the brightness of the
display.
The page contains the following buttons:
 Alarm
Tap once to access the Alarm Logs page (see Section 3.2.13).

Oxford Instruments Mercury iTC Specifications

General

Brand	Oxford Instruments
Model	Mercury iTC
Category	Controller
Language	English