Panasonic DLP PT-RZ34K

Chapter 4 Settings — [3D SETTINGS] menu
ENGLISH - 131
Note
f This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE].
f The crosstalk may get larger or the displayed image may get darker when the setting does not match with the 3D system in use.
[3D TEST MODE]
Set the image display mode for use with 3D system adjustments.
1) Press as to select [3D TEST MODE].
2) Press qw to switch the item.
[NORMAL] Standard setting.
[LEFT/LEFT] Displays the image of the left eye input signal for both the left and right eye images.
[RIGHT/RIGHT] Displays the image of the right eye input signal for both the left and right eye images.
[LEFT/BLACK]
Displays the image of the left eye input signal for the left eye image, and all black images for the right
eye image.
[BLACK/RIGHT]
Displays all black images for the left eye image, and the image of the right eye input signal for the
right eye image.
Note
f The [3D TEST MODE] setting returns to [NORMAL] when the projector is switched off.
f This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE].
f This function is disabled when [3D TEST PATTERN] is displayed.
[3D TEST PATTERN]
The 3D test pattern can be used to check operation and make adjustments even without a 3D signal.
1) Press as to select [3D TEST PATTERN].
2) Press qw to switch the item.
Menu screen + Input screen
Select a test pattern that is easy to check operation or make adjustment.
Menu screen + left: black/
right: white
Menu screen + left: white/
right: black
Menu screen + alternate
display of left/right
Menu screen + alternate
display of right/left
Note
f This function is disabled when [3D SYSTEM SETTING] is set to anything other than [SINGLE].
[SAFETY PRECAUTIONS MESSAGE]
Set to show or hide the safety precautions message related to 3D viewing when the projector is switched on.
1) Press as to select [SAFETY PRECAUTIONS MESSAGE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[ON] Shows the safety precautions message related to 3D viewing when the projector is switched on.
[OFF] Hides the safety precautions message related to 3D viewing when the projector is switched on.
Note
f If [OFF] is set, the safety precautions message related to 3D viewing is not displayed when the projector is switched on.
f A conrmation screen is displayed when switched from [ON] to [OFF]. Press qw to select [OK], and press the <ENTER> button to change
the setting to [OFF].
Attention
f If 3D images are viewed by unspecied number of people for commercial use, display the safety precautions message related to 3D viewing
to notify viewers.