EasyManua.ls Logo

Panasonic DLP PT-RZ34K

Panasonic DLP PT-RZ34K
325 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 7Appendix — Technical information
ENGLISH - 291
Technical information
Using PJLink function
The network function of this projector supports the PJLink class 1 and class 2, and setting of the projector or
querying of the projector status can be performed from the computer using the PJLink protocol.
Note
f To use the PJLink function with the projector, it is necessary to set the password of the administrator account. (x page 220)
PJLink commands
The following table lists the PJLink commands supported by the projector.
f x characters in tables are non-specic characters.
Class
Command
Control details
Parameter/response
string
Remark
1 POWR Power supply control
0 Standby
1 Power on
1 POWR ?
Power supply status
query
0 Standby
1 Power on
2 Preparing for switching off the projector
1, 2
INPT Input selection
31 HDMI
32 DVI-D
33 SDI
34 DIGITAL LINK
INPT ? Input selection query
35 SLOT-1 (input 1 of the Interface Board installed in <SLOT>)
36 SLOT-2 (input 2 of the Interface Board installed in <SLOT>)
37 SLOT-3 (input 3 of the Interface Board installed in <SLOT>)
38 SLOT-4 (input 4 of the Interface Board installed in <SLOT>)
1
AVMT Shutter control 30 Shutter function disabled (shutter: opened)
AVMT ? Shutter status query 31 Shutter function enabled (shutter: closed)
1 ERST ? Error status query xxxxxx
1st byte
Indicates fan errors, and
returns 0 - 2.
f 0 = No error is
detected
f 1 = Warning
f 2 = Error
2nd byte
Indicates light source errors,
and returns 0 or 2.
3rd byte
Indicates temperature errors,
and returns 0 - 2.
4th byte Returns 0.
5th byte Returns 0.
6th byte
Indicates other errors, and
returns 0 - 2.
1 LAMP ?
Light source status
query
AAAA X
AAAA: Light source runtime
X: 0 = Light source off, 1 = Light source on
1, 2 INST ?
Input selection list
query
31 32 33 34 35 36
37 38
1 NAME ? Projector name query xxxxx
Returns the name set in the [NETWORK] menu
[PROJECTOR NAME].
1 INF1 ?
Manufacturer name
query
Panasonic Returns manufacturer name.
1 INF2 ? Model name query PT-RZ34K Returns model name.
1 INF0 ?
Other information
queries
xxxxx Returns information such as version number.
1 CLSS ?
Class information
query
2 Returns class for PJLink.
2 SNUM ? Serial number query xxxxxxxxx Returns serial number.
2 SVER ? Software version query xxxxxxxxx Returns version number.

Table of Contents

Related product manuals