Panasonic DLP PT-RZ34K

Chapter 7 Appendix — Technical information
292 - ENGLISH
Class Command Control details
Parameter/response
string
Remark
2 INNM ?
Input terminal name
query
31 / HDMI
32 / DVI-D
33 / SDI
34 / DIGITAL LINK
35 / SLOT-1
SLOT-1 (name of the input 1 of the Interface Board installed in
<SLOT>)
36 / SLOT-2
SLOT-2 (name of the input 2 of the Interface Board installed in
<SLOT>)
37 / SLOT-3
SLOT-3 (name of the input 3 of the Interface Board installed in
<SLOT>)
38 / SLOT-4
SLOT-4 (name of the input 4 of the Interface Board installed in
<SLOT>)
2 IRES ?
Input signal resolution
query
AAAAxBBBB
AAAA: Horizontal resolution
BBBB: Vertical resolution
2 RRES ?
Recommended
resolution query
1920x1200 Returns display resolution.
2
FREZ Freeze control
0
1
Freeze clear
Freeze (stop)
FREZ ? Freeze status query
2 POWR
Cooling notication 0 Noties when the power is turned off.
Warmup notication 1 Noties when the power is turned on.
2 ERST Error notication xxxxxx Noties when an error occurs.
2 LKUP Link up notication xx:xx:xx:xx:xx:xx
Noties the MAC address when the PJLink communication
becomes possible.
2 INPT
Input switch
completion notication
31 HDMI
32 DVI-D
33 SDI
34 DIGITAL LINK
35 SLOT-1 (input 1 of the Interface Board installed in <SLOT>)
36 SLOT-2 (input 2 of the Interface Board installed in <SLOT>)
37 SLOT-3 (input 3 of the Interface Board installed in <SLOT>)
38 SLOT-4 (input 4 of the Interface Board installed in <SLOT>)
2 SRCH Projector search
ACKN=xx:xx:xx:xx:xx:xx
The projector connected to the same network that can
communicate with PJLink will respond with its MAC address.
PJLink security authentication
A PJLink password for security authentication procedure is required for communication of the PJLink command.
The PJLink password can be set in the [NETWORK] menu → [PJLink] → [PJLink PASSWORD] (x page 221), or
in “[Set up password] page (when accessed by administrator account)” (x page 256) of the web control screen.
When communicating the PJLink command without authentication procedure, set the PJLink password as blank.
The factory default setting of the PJLink password is blank.
f For specications related to PJLink, visit the website of Japan Business Machine and Information System
Industries Association.
URL http://pjlink.jbmia.or.jp/english/