Panasonic DLP PT-RZ34K

Chapter 4 Settings — [DISPLAY OPTION] menu
158 - ENGLISH
Setting [BIT DEPTH] in [SLOT IN] (OPT input)
1) Press as to select [SLOT IN].
2) Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3) Press as to select [SDI OPT1] or [SDI OPT2], and press the <ENTER> button.
f The detailed setting screen for the selected item is displayed.
4) Press as to select [BIT DEPTH].
5) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO] Automatically selects [12-bit] or [10-bit].
[12-bit] Fixes to [12-bit].
[10-bit] Fixes to [10-bit].
Setting [SIGNAL LEVEL] in [SLOT IN] (OPT input)
1) Press as to select [SLOT IN].
2) Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3) Press as to select [SDI OPT1] or [SDI OPT2], and press the <ENTER> button.
f The detailed setting screen for the selected item is displayed.
4) Press as to select [SIGNAL LEVEL].
5) Press qw to switch the item.
f The items will switch each time you press the button.
[64-940] Normally use this setting.
[4-1019] Select this item when gray is displayed as black.
[ON-SCREEN DISPLAY]
Set the on-screen display.
Setting [OSD POSITION]
Set the position of the menu screen (OSD).
1) Press as to select [ON-SCREEN DISPLAY].
2) Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3) Press as to select [OSD POSITION].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[2] Sets to the center left of the screen.
[3] Sets to the bottom left of the screen.
[4] Sets to the top center of the screen.
[5] Sets to the center of the screen.
[6] Sets to the bottom center of the screen.
[7] Sets to the upper right of the screen.
[8] Sets to the center right of the screen.
[9] Sets to the bottom right of the screen.