Panasonic DLP PT-RZ34K

Chapter 4 Settings — [DISPLAY OPTION] menu
152 - ENGLISH
Note
f Even if [AUTO COLOR SPACE SELECT] is set to [ENABLE], when the information required for the HDR (High Dynamic Range) support is
not included in the InfoFrame information added to the displayed video signal, the color space is not automatically set and follows the setting
in the [PICTURE] menu → [COLOR SPACE].
Setting [EDID SELECT] in [SLOT IN] (DisplayPort input)
1) Press as to select [SLOT IN].
2) Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3) Press as to select [DisplayPort1] or [DisplayPort2], and press the <ENTER> button.
f The [DisplayPort1] screen or the [DisplayPort2] screen is displayed.
4) Press as to select [EDID SELECT].
5) Press qw to switch the item.
f The items will switch each time you press the button.
[2K] Switches to EDID corresponding to the 2K video signal (maximum 1 920 x 1 200 dots) or lower.
[4K/60p/HDR]
Switches to EDID corresponding to the 4K video signal (maximum 4 096 x 2 160 dots, maximum
vertical scanning frequency 60 Hz).
This is EDID supporting HDR (High Dynamic Range).
[4K/60p/SDR]
Switches to EDID corresponding to the 4K video signal (maximum 4 096 x 2 160 dots, maximum
vertical scanning frequency 60 Hz).
This is EDID supporting SDR (Standard Dynamic Range). This does not support HDR (High Dynamic
Range).
[4K/30p]
Switches to EDID corresponding to the 4K video signal (maximum 4 096 x 2 160 dots, maximum
vertical scanning frequency 30 Hz).
Note
f Switch the setting to [4K/30p] when proper image is not projected while [EDID SELECT] is set to [4K/60p/HDR] or [4K/60p/SDR] and the 4K
video signal is input.
f Switch the setting to [2K] when proper image is not projected while [EDID SELECT] is set to [4K/60p/HDR], [4K/60p/SDR], or [4K/30p] and
the 2K video signal or lower is input.
f For details of the signal described in EDID of [4K/60p/HDR], [4K/60p/SDR], [4K/30p], or [2K], refer to “List of DisplayPort compatible signals”
(x page 313).
Setting [EDID MODE] in [SLOT IN] (DisplayPort input)
1) Press as to select [SLOT IN].
2) Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3) Press as to select [DisplayPort1] or [DisplayPort2], and press the <ENTER> button.
f The [DisplayPort1] screen or the [DisplayPort2] screen is displayed.
4) Press as to select [EDID MODE].
5) Press the <ENTER> button.
f The [DisplayPort EDID MODE] screen is displayed.
6) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT] Standard setting.
[SCREEN FIT] Changes the EDID data according to the [SCREEN FORMAT] setting.
[USER] Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items to EDID.
f Proceed to Step 11) when [DEFAULT] or [SCREEN FIT] is selected.
7) Press the <ENTER> button.
f The [RESOLUTION] screen is displayed.