Panasonic DLP PT-RZ34K

Chapter 4 Settings — [NETWORK] menu
222 - ENGLISH
7) Press as to select [PASSWORD] in [NEW], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
8) Press asqw to select the text, and press the <ENTER> button to enter the text.
f Enter the new password.
f Up to 32 alphanumeric symbols can be entered.
9) After the password is entered, press asqw to select [OK], and press the <ENTER> button.
f The [PJLink PASSWORD] screen is displayed.
10) Press as to select [PASSWORD CONFIRM], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
11) Enter the password entered in Step 8).
12) After the password is entered, press asqw to select [OK], and press the <ENTER> button.
f The [PJLink PASSWORD] screen is displayed.
13) Press as to select [STORE], and press the <ENTER> button.
f The conrmation screen is displayed.
14) Press qw to select [OK], and press the <ENTER> button.
Note
f The PJLink password can also be changed in “[Set up password] page (when accessed by administrator account)” (x page 256) of the
web control screen.
[PJLink CONTROL]
Enable/disable the control function using PJLink protocol.
1) Press as to select [PJLink].
2) Press the <ENTER> button.
f The [PJLink] screen is displayed.
3) Press as to select [PJLink CONTROL].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[ON] Select this item when controlling projectors with the PJLink protocol.
[OFF] Select this item when not controlling projectors with the PJLink protocol.
[PJLink NOTIFICATION]
Enable/disable the notication function of the PJLink.
1) Press as to select [PJLink].
2) Press the <ENTER> button.
f The [PJLink] screen is displayed.
3) Press as to select [PJLink NOTIFICATION].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF] Select this item when not using the notication function of the PJLink.
[ON] Select this item when using the notication function of the PJLink.
f Proceed to Step 5) when [ON] is selected.
5) Press as to select [NOTIFIED IP ADDRESS 1] or [NOTIFIED IP ADDRESS 2].
f Enter the IP address of the computer to be notied of the status of the projector.