Panasonic DLP PT-RZ34K

Chapter 5 Operations — Web control function
ENGLISH - 239
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
14
17
18
7
10
8
9
1
2
3
4
19
5
6
11
12
13
16
15
1 [PROJECTOR TYPE]
Displays the type of the projector.
2 [MAIN VERSION]
Displays the main version of the rmware of the projector.
3 [POWER]
Displays the status of the power.
4 [SHUTTER]
Displays the status of the shutter. ([CLOSE]: Shutter function
enabled; [OPEN]: Shutter function disabled)
5 [OPERATING MODE]
Displays the setting status of [OPERATING MODE].
6 [MAX LIGHT OUTPUT LEVEL]
Displays the setting status of [MAX LIGHT OUTPUT LEVEL].
7 [SERIAL NUMBER]
Displays the serial number of the projector.
8 [NETWORK VERSION]
Displays the network version of the rmware of the projector.
9 [REMOTE2 STATUS]
Displays the control status of the <REMOTE 2 IN> terminal.
10 [OSD]
Displays the status of on-screen display function. ([ON]:
Display; [OFF]: Hide)
11 [AC VOLTAGE]
Displays the input supply voltage.
12 [LIGHT OUTPUT]
Displays the setting status of [LIGHT OUTPUT].
13 [INPUT]
Displays the status of the selected input.
14 [INTAKE AIR TEMPERATURE]
Displays the status of the intake air temperature of the projector.
15 [EXHAUST AIR TEMPERATURE]
Displays the status of the exhaust air temperature of the
projector.
16 [TEMPERATURE INFORMATION]
Click [Detail] to display the temperature status for each part of
the projector.
17 [LIGHT]
Displays the lighting status and runtime of the light source.
18 [SELF TEST]
Displays the self-diagnosis information.
19 [PROJECTOR RUNTIME]
Displays the runtime of the projector.