Chapter 3 Basic Operations — Switching on/off the projector
74 - ENGLISH
Initial setting (screen setting)
Set the screen format (aspect ratio) and display position of the image.
After completed the initial setting, you can change the settings of each item from the [DISPLAY OPTION] menu →
[SCREEN SETTING].
1) Press qw to switch the setting.
f The setting will change each time you press the button.
16:10
SCREEN POSITION
Set as necessary for the screen in use.
INITIAL SETTING
SET
CHANGEMENU SELECT
SCREEN FORMAT
ENTER
4/6
2) Press as to select [SCREEN POSITION].
f [SCREEN POSITION] cannot be selected or adjusted when [SCREEN FORMAT] is set to [16:10].
3) Press qw to adjust.
16:9
0
SCREEN POSITION
Set as necessary for the screen in use.
INITIAL SETTING
SET
CHANGE
SCREEN FORMAT
ENTER
MENU SELECT
4/6
4) Press the <ENTER> button to proceed to the initial setting.
To Next Page
Loading...
