Feature Default
Data Line Security set/cancel
*1
730
Call Waiting Mode: Call from Extension off/BSS/OHCA/Whisper OHCA
*1
731
Call Waiting Mode: Call from CO set/cancel
*1
732
Executive Busy Override Deny set/cancel
*1
733
Not Ready Mode on/off
*1
735
Log-in/Log-out
*1
736
Incoming Call Queue Monitor 739
Hot Line program/set/cancel
740
Absent Message set/cancel
*1
750
BGM set/cancel
751
Remote Wake-up Call 76
Timed Reminder set/cancel 760
Printing Message 761
Extension Dial Lock set/cancel
*1
77
Time Service Switch
*1
780
Remote Extension Dial Lock off
*1
782
Remote Extension Dial Lock on
*1
783
NDSS Monitor Release (Centralized BLF Monitor Cancel)
784
Extension Feature Clear
*1
790
Extension Personal Identification Number (PIN) set/cancel
*1
799
Dial Information (CTI) None
Other PBX Extension Number (TIE) 01–16 None
Quick Dialing 1–80
*4
None
*1
SIP extension users can use these feature numbers.
*2
From a SIP extension, this feature number can be used only for Call Park Retrieve.
*3
This feature number is used for the SIP-carrier transfer feature. For more information, see 18.1.4 SIP Refer Transfer.
*4
It is possible to register Quick Dialing numbers that overlap with other registered numbers. This is used for the Automatic
Rerouting of VoIP Calls To Public CO Line feature.
2. Flexible Numbering (available while a busy, DND, or ringback tone is heard)
Feature numbers which are available while a busy, DND, or ringback tone is heard can be customized for
easy use. The numbers should be one digit (0-9, " ",
or "#") and must not conflict. For a list of the default
settings, refer to the following table:
[Flexible Numbering Table (available while a busy, DND, or ringback tone is heard)]
Feature Default
Call Waiting/DND Override
*1
1 or 2
*2
Executive Busy Override
*1
3
Document Version 2016-03 Feature Manual 147
7.1.4 Flexible Numbering/Fixed Numbering
To Next Page
Loading...
