Parker ac890 - Page 576

Programming
Page D-226 890CS Common Bus Supply - Frames B & D; 890CD Common Bus Drive and 890SD Standalone Drive - Frames B, C & D
8
9
10
A
B
C
D
E
1
2
3
4
5
6
7
PREF Name Block Type Range Default ro\rw Notes
110.03 ACTIVE PHASE OFFSET BOOL 0 : FALSE
1 : TRUE
FALSE ro Output
110.04 SPEED OFFSET PHASE OFFSET REAL -300.00 to 300.00 % 0.00 % rw
111.01 PERIOD PHASE TUNING REAL 0.001 to 30.000 s 10.000 s rw
111.02 ENABLE SPEED PHASE TUNING BOOL 0 : FALSE
1 : TRUE
FALSE rw
111.03 SPEED OFFSET PHASE TUNING REAL -300.00 to 300.00 % 1.00 % rw
111.04 ENABLE PHASE PHASE TUNING BOOL 0 : FALSE
1 : TRUE
FALSE rw
111.05 PHASE OFFSET PHASE TUNING REAL -300.00 to 300.00 1.00 rw
111.06 ACTIVE PHASE TUNING BOOL 0 : FALSE
1 : TRUE
FALSE ro Output
111.07 SINE WAVE PHASE TUNING BOOL 0 : FALSE
1 : TRUE
FALSE rw
111.08 REFERENCE TYPE PHASE TUNING ENUM 0 : SQUARE
1 : SINUSOIDAL
2 : TRIANGULAR
SQUARE rw
111.09 SPEED AMPLITUDE PHASE TUNING REAL 0.0000 to 100.0000 rev/s 0.1000 rev/s rw
111.12 RUN TR FUNC TEST PHASE TUNING BOOL 0 : FALSE
1 : TRUE
FALSE rw
111.13 NO OF MEASRMENTS PHASE TUNING INT 1 to 10000 100 rw
111.14 TORQUE AMPLITUDE PHASE TUNING REAL 0.00 to 100.00 % 20.00 % rw
111.15 TRANSF FUNC TYPE PHASE TUNING ENUM 0 : SPEED TRANSFR FN
1 : OPEN LP TRANS FN
2 : CURRENT LP TR FN
OPEN LP
TRANS FN
rw
111.16 POSN AMPLITUDE PHASE TUNING REAL 0.0000 to 100.0000 deg 1.0000 deg rw
111.17 MEASURMENTS
DONE
PHASE TUNING INT _ 0 ro Output