Parker EME
Introduction
I11 T11 192-120101 N6 - March 2004 11
1.3.2.2 C3 MotorManager: configuration of almost any motors
New:
! Integration of distance coded feedback systems
! Export / Import of user defined (customer’s) motor
! Calibration of commutation also for linear motors with small travel path
Changes
! Linear motors with brakes can be configured
! Calculation of the recommended number of poles was corrected
! Calibration of SinCos motors was corrected
! The minimum moment of inertia was reduced from 10kgmm
2
to 1kgmm
2
! Configuration of rotatory motors with analog hall sensors was completed
1.3.2.3 C3 IEC61131-3 - Debugger
Forcing of the inputs for T30 and T40 is possible.
1.3.2.4 CoDeSys - IEC61131-3 - development tool
New CoDeSys version 2.3.2.6
1.3.2.5 CamEditor: cam creation for C3 T40
-
1.3.3. Complements / corrections in manual and online help
New structure of the manual:
! All technology functions are described in a help.
! Manuals (PDF files) have a new structure:
! I10 T10 manual
! I11 T11 manual
! I20 T11 manual
! I21 T11 manual
! A single manual for all devices programmable according to IEC
(I11 T30, I20 T30, T21 T30, I11 T40, I20 T40, I21 T40)
The assignment of the respective chapters is indicated.
To Next Page
Loading...
Need help?
General
