Parker Compax3 S150 V4 User Manual

Parker EME
Configuration
Motor selection
I11 T11 192-120101 N6 - March 2004 37
4.1.1. Motor selection
The selection of motors can be broken down into:
! Motors that were purchased in Europe and
! Motors that were purchased in the USA.
! You will find non-standard motors under "Additional motors" and
! Under "User-defined motors" you can select motors set up with the C3
MotorManager.
For motors with holding brake SMHA or MHA you can enter brake deceleration
times. See also brake delay times (see on page 76).
Please note the following equivalence that applies regarding terms to linear
motors:
! Rotary motors / linear motors
! Revolutions ≡ Pitch
! Rotation speed ≡ Speed
! Torque ≡ Power
! Moment of inertia ≡ Load
Notes on direct drives (see on page 143 ) (Linear and Torque - Motors)

Parker Compax3 S150 V4 Specifications

General

Output Current	150 A
Control Type	Digital
Series	Compax3
Model	S150 V4
Enclosure Rating	IP20
Communication Interfaces	CANopen, RS-232, RS-485
Feedback Options	Resolver
Protection Features	Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit
Relative Humidity	5 to 95% non-condensing
Operating Temperature	0 to +45 °C (32 to 113 °F)