Parker EME
Introduction
I11 T11 192-120101 N6 - March 2004 13
1.4.3. Special safety instructions
! Check the correct association of the device and its documentation.
! Never detach electrical connections while voltage is applied to them.
! Safety devices must be provided to prevent human contact with moving or
rotating parts.
! Make sure that the device is operated only when it is in perfect condition.
! Implement and activate the stipulated safety functions and devices.
! Operate the device only with the housing closed.
! Ensure that motors and any linear drives present are mounted securely.
! Check that all live terminals are secured against contact. Fatal voltage levels of to
750V occur.
1.5 Warranty conditions
! The device must not be opened.
! Do not make any modifications to the device, except for those described in the
manual.
! Make connections to the inputs, outputs and interfaces only in the manner
described in the manual.
! When installing the device, make sure the heat dissipater receives sufficient air.
! Attach the devices according to the mounting instructions, using the provided
fixing holes. We cannot provide any guarantee for any other mounting methods.
Note on exchange of options
Compax3 options must be exchanged in the factory to ensure hardware and
software compatibility.
To Next Page
Loading...
Need help?
General
