10
92 Workshop Manual, TPD 1377E, issue 4
100 Series
Pressure relief valve
To remove and to fit Operation 10-2
Special requirements
Renew the 'O' ring when the pressure relief valve is fitted to the cylinder block.
Caution: When the crankshaft is removed or fitted the pressure relief valve must be removed first.
Torque Nm (lbf ft) kgf m
Pressure relief valve 64 (47) 6,5
102-05
103-07
103-10
103-13
103-15
104-19
104-22
This document has been printed from SPI². Not for Resale
To Next Page
Loading...
