1
Workshop Manual, TPD 1377E, issue 4 7
100 Series
Engine I.D. location
The engine identification plate (A1) is located on the front right side of the engine, just above the fuel injection
pump.
It consists of the following:
Abbreviations and codes
Engine build list (parts list) numbering system
The standard engine parts list numbering code system is defined as follows:
Code I Engine Build Code
Code II Engine parts list
Parts list increases numerically for both OEMS and distributors.
Code III Country of manufacture
Code IV Engine serial number
Individual engine serial number commencing with 000001 increasing numerically.
Code V Year of Manufacture
Code I II III IV V
Example KE 30260 U 000001 D
Engine Build code Engine Build code
102 - 05 KN 103 - 15 KE
103 - 07 KL 104 - 19 KF
103 - 10 KD 104 - 22 KR
103 - 13 KH
Code Country of manufacture
J Made in Japan
U Made in U.K.
Code Year Code Year Code Year Code Year Code Year
M 1985 T 1989 Y 1994 E
01/01/99
31/03/99
J 2002
N 1986 U 1990 A 1995 F
01/04/99
31/12/99
K 2003
O not used V 1991 B 1996 G 2000 L 2004
P 1987 W 1992 C 1997 H 2001
Q/S 1988 X 1993 D 1998 I not used‘
1
This document has been printed from SPI². Not for Resale
To Next Page
Loading...
